Explore heavy-duty storage racks, carton-flow modules, automated retrieval systems, and platform access safety solutions built to withstand heavy cycle demands across Southeast Asian industrial distribution facilities.
In modern multi-tier warehousing, elevated picking mezzanines, and automated pallet distribution centers, the physical transfer of unitized loads from forklifts to elevated platforms introduces significant edge-fall hazards. Traditional removable chains, sliding horizontal bars, or single-hinged safety gates rely excessively on human intervention. When ground-level operators hoist heavy skids to high-bay decks, manual barriers are frequently left unlatched, creating life-threatening breach points.
Our OEM/ODM Mezzanine Safety Gates utilize dynamic mechanical interlocking and dual-barrier counterweight kinematics. Designed strictly under the international safety framework of EN ISO 14122-3:2016 and OSHA 1910.29 (Fall Protection Systems), our dual-gate rollover and pivot architectures guarantee that an operator can never access the open ledge while a pallet is being loaded. When the outer barrier swings open to receive forklift cargo, the integral inner barrier locks downward across the warehouse mezzanine floor, completely isolating platform workers from the precipice.
Fail-Safe Kinematic Mandate: Under Thailand’s Ministry of Labour Ministerial Regulation on Occupational Safety, Health and Environment in Working at Heights (B.E. 2564 / 2021), elevated work decks exceeding 2.0 meters must maintain zero-gap physical perimeter protection during material staging. Our dual-interlock rollover barriers eliminate manual human error by maintaining constant physical segregation.
Fabricated using structural Q235B/Q355B low-alloy carbon steel or SUS304 architectural-grade stainless profiles, our systems are engineered to withstand horizontal impacts exceeding 1,000 N without structural deflection exceeding L/250. Integrated polyurethane counterweight dampers, UHMW-PE guide bushings, and sealed cartridge bearings ensure frictionless, non-sparking continuous duty cycles in high-throughput distribution environments.
Every industrial facility presents distinct architectural constraints, vertical crane envelopes, and forklift mast clear-heights. We manufacture four primary structural topologies tailored to your floor-to-ceiling volume.
Engineered for high-volume cross-docking and standard Euro/Thai pallet footprints. The arching dual-barrier design pivots smoothly over its central axis; when the roadside gate is elevated for forklift access, the inside barrier seals flush to the mezzanine deck floor.
Configured for multi-tier platform zones where horizontal clearance or overhead roof joists restrict cantilever swing radius. Counterbalanced by concealed dual pulley weights, allowing effortless one-handed vertical translation with optical interlocks.
Integrated with warehouse management systems (WMS) and automated guided vehicles. Incorporates linear magnetic actuators, inductive proximity sensors, and dual-circuit safety PLCs to automate perimeter opening cycles during automated AS/RS pallet drops.
From the export-driven manufacturing lines in Chonburi and Rayong to the mega fulfillment centers of Samut Prakan and Pathum Thani, our mezzanine barrier gates solve distinct spatial, climatic, and regulatory challenges.
Automotive parts manufacturers across Amata City and WHA Eastern Seaboard require heavy parts staging across elevated mezzanine mezzanines. Our gates withstand the high frequency of reach-truck loadings of engine components, stamping dies, and wire harnesses.
Cleanroom-adjacent multi-tier mezzanine floors demand zero particulate shedding. We fabricate electro-polished SUS304/SUS316 safety gates with sealed polymer roller bearings, preventing carbon dust contamination during PCB and component transport.
Fast-moving retail distribution hubs near Suvarnabhumi Airport operate 24/7 pick-and-pack platforms. Our lightweight aluminum-hybrid gates provide rapid, single-motion turnover cycles to optimize sorting and parcel container replenishment.
Industrial land leasing rates in key logistics zones such as Bangna-Trad, Samut Prakan, and Chonburi have experienced sustained appreciation following the development of the Eastern Economic Corridor (EEC). To circumvent capital-intensive real estate acquisitions, industrial developers are systematically maximizing the cubic height of their facilities, replacing single-level floor layouts with multi-tiered, rack-supported structural mezzanines reaching up to 12 meters clear height.
However, operating multi-tier elevated decks in Thailand presents severe environmental demands. The combination of sustained relative humidity (often exceeding 80–90%), seasonal monsoons, and ambient coastal salinity around Laem Chabang Port accelerates galvanic oxidation and causes standard industrial enamel paints to blister and delaminate within months. As an experienced OEM/ODM fabricator, we engineer our safety gates with specialized surface protection options:
Review the mechanical properties, load ratings, structural clearances, and certification parameters across our flagship mezzanine safety gate product lines.
| Gate Model Series | Kinematic Type | Clear Pallet Width | Clear Load Height | Frame Material & Gauge | Impact Energy Rating | Compliance Standard |
|---|---|---|---|---|---|---|
| MSG-RO-1600 | Rollover Dual-Pivot Interlock | 1,600 mm (Single Euro/Thai) | 1,800 mm to 2,200 mm | Q235B Tubular Steel (3.0mm) | 1,200 Joules (Forklift edge strike) | EN ISO 14122-3 / OSHA 1910.29 |
| MSG-RO-2600 | Dual-Bay Rollover Pivot | 2,600 mm (Dual Pallet Lane) | 2,000 mm to 2,400 mm | Q355B High-Tensile Steel | 1,800 Joules (With reinforced toe-board) | EN ISO 14122-3 / TIS-Equivalent |
| MSG-VL-2000 | Vertical Lift Guillotine | 2,000 mm | 2,800 mm (High Mast) | Extruded Aluminum & Carbon Steel | 1,000 Joules | OSHA 1910.28 / AS 1657 |
| MSG-SW-1800 | Horizontal Self-Closing Pivot | 1,800 mm | Full Clear Vertical Access | SUS304 Stainless Steel (1.5–2.5mm) | 850 Joules | GMP / HACCP Cleanroom Certified |
| MSG-AGV-Auto | Pneumatic Sensor-Interlocked | 2,400 mm | 2,500 mm | Reinforced Structural Box Beam | 2,200 Joules (Heavy duty bumper rail) | ISO 13849-1 Cat 3 / PLd Safety |
With more than 20 years of manufacturing experience, our production infrastructure controls every link in the metal fabrication supply chain, from raw hot-rolled coil processing to high-accuracy multi-point auto punching.
Critical engineering considerations, shipping terms, import duties, and customized design workflows for sourcing industrial safety gates and storage systems in Thailand.
In Thailand, industrial fall protection is enforced under the Ministry of Labour's Ministerial Regulation on Occupational Safety, Health and Environment in Working at Heights (B.E. 2564 / 2021) and guidelines from the Department of Labour Protection and Welfare (DLPW). Platforms elevated 2.0 meters or more must possess permanent guardrails of at least 90–110 cm height with mid-rails and 10 cm toe-boards. When loading materials, gates must prevent gaps or edge exposure. Our dual-interlocking rollover gates strictly adhere to these local directives as well as international EN ISO 14122-3 and OSHA 1910.29 criteria.
Yes. As an OEM/ODM direct factory supplier, 100% of our production can be customized. We can adjust the hinge brackets, base-mounting plates, and counterbalance arms to anchor directly into tear-drop, diamond-hole, or bolted box-section racking uprights. Our engineering department provides CAD structural submittals, clearance envelope simulations, and anchor tension calculations prior to production sign-off.
We routinely supply contractors and end-users under CIF Bangkok Port (Klong Toey), CIF Laem Chabang Port, or DAP / DDP directly to job sites in Chonburi, Rayong, Samut Prakan, and Ayutthaya. All safety gates and rack components are flat-packed in high-density export steel crates with moisture-absorbent desiccants and anti-abrasion edge wrapping to survive sea transit without coating scratches.
For operations located in coastal or high-humidity provinces (e.g., Rayong, Chonburi, Samut Prakan), we offer hot-dip galvanization conforming to ASTM A123 / ISO 1461 (85+ μm zinc thickness) or a dual-layer architectural powder coating system featuring zinc-rich epoxy primers topped with UV-stable thermoset polyester powder. This guarantees more than 1,000 hours of continuous salt-spray resistance without blistering or edge corrosion.
Standard design configurations (such as our 1.6m and 2.4m single/double rollover gates) typically have a manufacturing turnaround of 10 to 18 business days. Custom-engineered configurations requiring specialized sensors, pneumatic cylinders, or 316-grade stainless steel fabrication take approximately 20 to 25 business days. Direct ocean transit to Laem Chabang or Bangkok ranges from 12 to 20 days depending on the dispatch port.
Every shipment is accompanied by comprehensive 3D step-by-step assembly drawings, bolt torque specifications, and maintenance inspection checklists. Additionally, for major turnkey distribution platform projects in the Eastern Economic Corridor (EEC), we provide on-site technical supervisors or direct third-party certified Thai installation partners to conduct anchor pull-out tests and final commissioning.
Collaborate directly with our engineering team for free CAD platform layout reviews, structural load ratings, and competitive direct-factory pricing for the Thailand market.